Oldham Couplings, Body AL, Elastic PA66
| Tabloya Dimensionê | mm | |||||||
| Cins | Mezinahiya pîvana hundurê DL / D2 ya hevpar | ΦD | L | LF | LP | F | M | Tightening torque (nm) |
| GL-16X18 | 4-5-6-6.35-7-8 | 16 | 18 | 7.1 | 12 | 3.0 | M3 | 1.2 |
| GL-20X23 | 5-6-6,35-7-8 | 20 | 23 | 9 | 12.7 | 4.5 | M4 | 1.7 |
| GL-20X25 | 5-6-6.35-8-9-9.525-10 | 20 | 25 | 10.1 | 12.7 | 3.0 | M4 | 2.5 |
| GL-25X28 | 5-6-8-9-9.525-10-11-12-14 | 25 | 28 | 21 | 17.7 | 2.8 | M4 | 2.5 |
| GL-32X33 | 5-6-8-9-9.525-10-11-12-12.7-14-15-16 | 32 | 33 | 14 | 20 | 3.4 | M4 | 2.5 |
| GL-40X32 | 8-9-9.525-10-11-12-12.7-14-15-16-17-18-19-20 | 40 | 32 | 14 | 20.3 | 3.2 | M4 | 2.5 |
| GL-44X46 | 8-9-9.525-10-11-1212.7-14-15-16-17-18-19-20-22 | 44 | 46 | 20.7 | 18.4 | 3.5 | M5 | 5 |
| GL-50X38 | 10-12-12.7-14-15-16-17-18-19-20-22-24-25 | 50 | 38 | 16.5 | 22.35 | 3.8 | M5 | 5 |
| GL-55X57 | 10-12-12.7-14-15-16-17-18-19-20-22-24-25-28-30-32 | 55 | 57 | 26.2 | 25.8 | 7.8 | M5 | 5 |
| GL-63X47 | 14-15-16-17-18-19-20-22-24-25-28-30-32 | 63 | 47 | 21 | 25.8 | 6.0 | M6 | 8 |
| GL-70X77 | 16-17-18-19-20-22-24-25-28-30-32-25-38-40 | 70 | 77 | 37 | 25 | 13.5 | M8 | 20 |
Parametreya teknîkî
| Parametreya teknîkî | mm | |||||||
| Cins | torque Rated (Nm) | eccentricity destûr (mm) | Goşeya veqetandinê ya destûr (∠.) | Veguheztina eksê ya destûr (mm) | Leza destûr (RPM) | Serhişkiya torsîyonê ya statîk (Nm/rad) | Momenta bêhêziyê (Nm) | Giraniya hevgirtinê (g) |
| GL-16X18 | 0.7 | 0.8 | 3 | ±0.2 | 9000 | 30 | 3.0X10-7 | 6 |
| GL-20X23 | 1.2 | 1.5 | 3 | ±0.2 | 3100 | 60 | 1.0X10-6 | 14 |
| GL-20X25 | 1.25 | 1.2 | 3 | ±0.2 | 7000 | 58 | 3.0X10-7 | 18 |
| GL-25X28 | 2 | 1.6 | 3 | ±0.2 | 6000 | 130 | 2.8X10-6 | 25 |
| GL-32X33 | 4.5 | 2 | 3 | ±0.2 | 4800 | 270 | 8.9X10-5 | 44 |
| GL-40X32 | 9 | 2.4 | 3 | ±0.2 | 3600 | 520 | 2.1X10-5 | 81 |
| GL-44X46 | 12 | 2.8 | 3 | ±0.2 | 3500 | 560 | 3.8X10-5 | 136 |
| GL-50X38 | 19 | 2.6 | 3 | ±0.2 | 3000 | 800 | 6.0X10-5 | 142 |
| GL-55X57 | 22 | 3.3 | 3 | ±0.2 | 2800 | 795 | 9.9X10-5 | 255 |
| GL-63X47 | 33 | 3 | 3 | ±0.2 | 2500 | 1200 | 2.1X10-4 | 320 |
| GL-70X77 | 56 | 3.8 | 3 | ±0.2 | 2500 | 1260 | 3.9X10-4 | 445 |
Tabloya berhevdanê ya pîvanên hilberandina keywayê
| Pîvana pîvana mîlî | Pîvana makîneya standard a keyway | Mezinahiya Keyway | Nêzkirina standard ya pêvajoya keywayê | |||
| dl/d2 | b | t | (bxh) |
| ||
| Firehiya Slot | bêhne | kûrahiya hêlînê | bêhne | |||
| Φ6-Φ7.9 | 2 | ±0.0125 | 1.0 | ±0.10 | 2X2 | |
| Φ8-Φ10 | 3 | ± 0,0150 | 1.4 | 3X3 | ||
| Φ10.1-Φ12 | 4 | 1.8 | 4X4 | |||
| Φ12.1-Φ17 | 5 | 2.3 | 5X5 | |||
| Φ17.1-Φ22 | 6 | ± 0,0180 | 2.8 | 6X6 | ||
| Φ22.1-Φ30 | 8 | 3.3 | ±0.20 | 8X7 | ||
| Φ30.1-Φ38 | 10 | ± 0,0215 | 3.3 | 10X8 | ||
| Φ38.1-Φ44 | 12 | 3.8 | 12X8 | |||
| Φ44.1-Φ50 | 14 | 4.3 | 14X9 | |||
| Φ50.1-Φ58 | 16 | 4.4 | 16X10 | |||
| Φ58.1-Φ65 | 18 | 4.4 | 18X11 | |||
Tabloya pîvana xêzkirinê
| Tabloya pîvana xêzkirinê | mm | |||||||
| Cins | Mezinahiya pîvana hundurê DL / D2 ya hevpar | ΦD | L | LF | LP | F | M | Tightening torque (nm) |
| GLC-16X29 | 4-5-6-6,35 | 16 | 29 | 12.5 | 12 | 3 | M2.5 | 0.8 |
| GLC-20X33 | 5-6-6,35-7-8 | 20 | 33 | 14.1 | 12.7 | 3.8 | M2.5 | 0.8 |
| GLC-25X39 | 5-6-6.35-8-9-9.525-10-11-12 | 25 | 39 | 16.9 | 17.7 | 3.9 | M3 | 1.2 |
| GLC-32X45 | 5-6-8-9-9.525-10-11-12-12.7-14-15-16 | 32 | 45 | 20 | 20 | 4.5 | M4 | 2.5 |
| GLC-40X50 | 8-9-9.525-10-11-12-14-15-16-17-18-19 | 40 | 50 | 23 | 20.3 | 5.5 | M5 | 5 |
| GLC-44X46 | 8-9-9.525-10-11-12-14-15-16-17-18-19-20-22 | 44 | 46 | 20.7 | 18.4 | 7 | M5 | 5 |
| GLC-50X53 | 10-11-12.7-14-15-16-17-18-19-20-22-24 | 50 | 53 | 24.2 | 22.35 | 7.5 | M6 | 8 |
| GLC-50X58 | 10-11-12.7-14-15-16-17-18-19-20-22-24 | 50 | 58 | 26.5 | 22.35 | 6.3 | M6 | 8 |
| GLC-55X57 | 10-11-12.7-14-15-16-17-18-19-20-22-24-25-28 | 55 | 57 | 26.2 | 25.8 | 6.3 | M6 | 8 |
| GLC-63X71 | 14-15-16-17-18-19-20-22-24-25-28-30-32 | 63 | 71 | 32.8 | 26.2 | 7.8 | M8 | 20 |
| GLC-70X77 | 14-15-16-17-18-19-20-22-24-25-28-30-32-35-38 | 70 | 71 | 37 | 25 | 7.7 | M8 | 20 |
Parametreya teknîkî
| Parametreya teknîkî | mm | ||||||||
| Cins | torque Rated (Nm) | Eccentricity destûr (mm) | Goşeya defleksiyonê ya destûrdar (∠.) | Veguheztina eksê ya destûr (mm) | Leza destûr (RPM) | Serhişkiya torsîyonê ya statîk (Nm/rad) | Momenta bêhêziyê (Nm) | Giraniya hevgirtinê (g) | |
| GLC-16X29 | 0.7 | 0.8 | 3 | ±0.2 | 9000 | 30 | 3.5X10-7 | 12 | |
| GLC-20X33 | 1..2 | 1.2 | 3 | ±0.2 | 7000 | 58 | 1.5X10-6 | 19 | |
| GLC-25X39 | 2 | 1.6 | 3 | ±0.2 | 6000 | 130 | 3.2X10-6 | 35 | |
| GLC-32X45 | 4.5 | 2 | 3 | ±0.2 | 4800 | 270 | 1.5X10-5 | 67 | |
| GLC40X50 | 9 | 2.4 | 3 | ±0.2 | 3600 | 520 | 4.2X10-5 | 114 | |
| GLC-44X46 | 12 | 2.5 | 3 | ±0.2 | 3500 | 800 | 4.5X10-5 | 140 | |
| GLC-50X53 | 19 | 2.6 | 3 | ±0.2 | 3000 | 800 | 1.0X10-4 | 190 | |
| GLC-50X58 | 19 | 3 | 3 | ±0.2 | 3000 | 800 | 1.1X10-4 | 215 | |
| GLC-55X57 | 25 | 3.2 | 3 | ±0.2 | 3000 | 900 | 1.3X10-5 | 260 | |
| GLC-63X71 | 33 | 3 | 3 | ±0.2 | 2550 | 1200 | 3.5X10-4 | 455 | |
| GLC -70X77 | 56 | 3.5 | 3 | ±0.2 | 2500 | 1260 | 4.1X10-4 | 520 | |
Hevgirêdanên Oldham hevgirêdanên mîlê maqûl ên sê-parçeyî ne ku ji bo girêdana şaneyên ajotinê û ajotinê di meclîsên veguheztina hêza mekanîkî de têne bikar anîn. Hevgirêkên mîlî yên maqûl têne bikar anîn da ku li hember xeletiya neçarî ya ku di navbera şaftên girêdayî de çêdibe û, di hin rewşan de, ji bo şokkêşanê bigire. Materyal: Uub di Aluminium de ne, laşê elastîk di PA66 de ye.
